KNIPEX 97 61 145 A - Crimping Pliers for wire end sleeves head polished, handles plastic coated

Please note that Knipex items can't be shipped to the US.

Crimping Pliers for wire end sleeves head polished, handles plastic coated.
For crimping wire end sleeves according to DIN 46228 parts 1 + 4 in the range from 0.25 up to 2.5 mm².
Crimping in marked trapezoidal dies for reliable connections between the sleeve and the conductor.
Vanadium electric steel. Forged, oil-hardened.

Position and permanently crimp end sleeves according to DIN 46228 Part 1 + 4.
For work on control systems, in IT, on domestic electrical and electronic systems.
The 97 61 145 A crimping pliers from Knipex are a solid and accurate tool that can be used wherever end sleeves (ferrules) with a trapezoidal profile are crimped.
The trapezoidal-shaped crimped end sleeves are especially suitable in the terminal strips on control systems due to the usually high and slim supports.
The Knipex crimping pliers are also used in motor electronics and on domestic electrical systems, e.g. during the installation of entertainment electronics or lighting elements.
To achieve a crimp result in line with the DIN standard, the crimp profile must be carefully matched to the material volume of the end sleeve (ferrule) plus wires.
This means that here too it is essential to have the appropriate tool.
Appropriate is also the key word when selecting the right crimp die.
Four crimp dies of between 0.25 and 2.5 mm² are available in total.
The trapezoidal cross sections are clearly marked to ensure that the end sleeves (ferrules) are inserted correctly.
Custom-fit alignment of the crimp profile to the crimp volume.
To achieve a crimp result in line with the DIN standard, the crimp profile must be carefully matched to the material volume of the end sleeve (ferrule) plus wires.
This means that here too it is essential to have the appropriate tool.
Manual force can be measured easily when crimping end sleeves (ferrules) with the 97 61 145 A crimping pliers.
Once the correct crimp die has been selected, after crimping the end sleeve sits permanently and securely on the conductor.
Accurate and reliable crimping.
Crimping pliers from Knipex: good quality for maximum durability.
Crimping pliers for end sleeves (ferrules) from the Knipex range impress with their smooth-running and optimum transmission ratio.
The Knipex crimping pliers are manufactured on modern machinery using vanadium electric steel, and are then oil-hardened.
The safe use and great benefits of the tools are the results of decades of toolmaking experience, constant product development and the commitment by Knipex towards high quality standards.

 

• AWG: 23 - 13
• Capacity mm²: 0.25 - 2.5 mm²
• Crimping Profile: Trapezoidal
• Handles: plastic coated
• Head : polished
• Height: 13 mm
• length: 150 mm
• Number Of Crimping Positions: 4
• RoHs: No
• Weight: 140 g
• width: 52 mm