KNIPEX 13 86 200 - Pliers for Electrical Installation chrome plated, handles insulated with multi-component grips, VDE-testedVisit the KNIPEX Store
Get 10% off €150+ with promo code: FALL23
Get 10% off €150+ with promo code: FALL23
Find out more here.
For more information click here.
Insulated according to IEC 60900, usable up to 1000 V AC/1500 V DC.
Pliers for Electrical Installation chrome plated, handles insulated with multi-component grips, VDE-tested
6 functions in one pair of pliers.
Multifunctional pliers for the electrical installation.
To grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves (ferrules).
Smooth surfaces near the tips grip single cores without damaging them.
Serrated gripping surfaces and pipe grip for gripping flat and round material.
Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.
Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm².
Crimp die for wire end sleeves 0.5 - 2.5 mm².
Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / dia. 15 mm.
Slim dimensions for easy access.
Bolted joint: precise, zero backlash operation of pliers.
High-grade special tool steel, forged, multi stage oil-hardened.
Why Choose the Knipex 13 86 200 Pliers for Electrical Installations?
Professional electricians use a wide variety of diagonal cutters and chrome-plated multi-component pliers to effortlessly and accurately cut various types of cables such as stranded wire cables and solid conductor cables without crushing or fraying them.
Experienced and highly skilled electricians carefully deploy cable cutters to remove the cable sheathing.
Single conductors are stripped using the precise stripping holes without causing any damage to the conductor in this process.
The sleeves must be mounted to connect flexible wiring after removing the cable insulation using the stripping holes.
The end sleeve is attached and reliably crimped onto the strands of the cable in the universal crimp die.
Unlike conventional pliers, the Knipex 13 86 200 pliers for electrical installation is designed with six functions in one pair of pliers, a clear-cut outside edge on the gripping surfaces, chrome-plated plier heads, and slim dimensions - allowing your fast and easy access to confined spaces and hard to reach areas, optimized protection of the workpieces, and maximum efficiency.
This Knipex 1386200 VDE tested multifunctional pliers are the perfect choice for professional users who need to bend, cut, and grip a wide variety of flat and round materials with maximum accuracy.
The knipex pliers for electrical installations come with 0.75 - 1.5 mm² and 2.5 mm² stripping holes for conductors, 0.5 - 2.5 mm² crimping die for wire ferrules, and induction-hardened precision cutting edges for a wide variety of copper and aluminum cables - enabling you for ultimate protection against the electric shock of up to 1000 volts, increased efficiency, and reduced costs in terms of time saved.
Whether you are looking for bending, deburring, cutting cables, stripping, or even crimping wire ferrules, when you choose knipex VDE tested multifunctional pliers, you can rest assured that you can get your most critical job done with less time and increased productivity.
The multifunctional tool for electricians.
Ideal for electricians: the pliers for electrical installation combine six functions in one pair of pliers.
For cutting cable, for wire stripping, deburring, bending, gripping and crimping
Due to their many functions, these universal pliers mean there is no need to constantly change tools.
Just one tool is adequate for the most important, recurring work steps in electrical installation.
The electrical installation pliers save time, space and weight.
At 200 mm long, they fit in any tool bag and with a weight of just 280 g they are light weight - especially compared to a number of individual tools.
Good ideas practically implemented.
The tip of the gripping surfaces of the installation pliers are smooth, so that single conductors can be held and positioned without being damaged.
Profiled gripping surfaces and a pipe grip are available for flat and round materials.
The induction hardened precision tips produce clean cuts on Cu and Al cables up to ø 15 mm.
The installation pliers are comfortable and safe to use thanks to their insulating multi-component grips - with the right training also on live parts.
Versatile tool for professional users.
Cable shears for cutting copper cable.
Universal crimp die for end sleeves (ferrules) from 0.5 to 2.5 mm².
Wire stripping holes for conductors of between 0.75 to 1.5 and 2.5 mm².
Knipex quality and engineering services - Made in Germany.
Two aspects are vital to the quality of a tool: the performance and durability.
At Knipex, pliers are developed from the point of view of the user, and focus on their direct application.
Knipex electrical installation pliers replace several tools.
Uses are equally diverse - and last for several years of tough work.
We forge our tools from quality materials, machine them with high precision on modern machinery and harden them carefully with multiple stage heat treatment.
Every pair of Knipex pliers represents more than 130 years of specialist know-how.
- AWG: 1 / 0
- Capacity mm²: 0.5 - 2.5 mm²
- Crimping Profile: Mandrel-Crimp
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Cutting capacity copper cable, multiple-stranded (diameter): 15 mm
- Handles: insulated with multi-component grips, VDE-tested
- Head : chrome plated
- height: 20mm
- Jaw Type: flat jaws
- Joint Type: Bolted joint
- length: 200 mm
- RoHs: No
- Standard DIN: DIN EN 60900
- Standard IEC: IEC 60900
- Stripping Capacity For Cross-Sections: 0.75 - 1.5 / 2.5 mm
- Surface: chrome plated
- Weight: 301 g
- width: 85 mm