KNIPEX 35 82 145 - Electronics Pliers head mirror polished, handles with multi-component grips

Electronics Pliers head mirror polished, handles with multi-component grips.
Precision pliers for fine assembly work, e g. in electronics and fine mechanics.
Load-optimised for a more direct feel when working.
For gripping, holding and bending.
Sturdy, zero backlash box joint.
Smooth ground gripping surfaces.
Soft transitions.
No sharp edges.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger.
Ball bearing chrome steel.

Small, fine and safe: the electronics pliers for fine installation work.
Tips at a 45° angle: 145 mm long for plenty of freedom of movement even where space is restricted.
Electronic equipment, printed circuit boards and precision constructions such as measuring equipment or delicate apparatus are usually built in tight spaces.
A compact tool is therefore needed which can also be used to work well even in poorly accessible areas.
With a length of 145 mm and their long, slim and flat head, the 35 82 145 electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components.
The gripping surfaces are smooth ground to protect sensitive surfaces.
The 35 mm long tips are at a 45° angle for ideal access also to concealed parts.
The accurate, well-measured transmission of manual force to the component is crucial with gripping pliers for small and sensitive components.
The mechanics of the Knipex 35 82 145 are very finely adjusted.
The box joint is solid and smooth operating because the inner handle is guided on both sides by the outer handle.
This ensures precise running without any tilting effect.
The low friction double spring supports the gentle opening of the pliers.
Smooth operating and accurate, with box joint design and double spring.
The handles of the Knipex 35 82 145 electronics pliers are forged from special tool steel, oil-hardened, carefully deburred, mirror-polished and completed with opening spring and rivet to produce gripping pliers.
The rust protection is safe for circuits because there is no chrome-plating, which means that no pieces of chrome can peel off and fall onto printed circuit boards.
The mirror polish in conjunction with a fine oil film applied in the factory provides perfectly adequate corrosion protection for the pliers during workshop use.
It is sufficient for the oil film to be replaced occasionally.
High Knipex quality standards and safety rust protection.
Sensitive parts such as plastic plug connectors can be gripped securely using the smooth operating pliers.
Delicate ends of components and solder contacts can be accurately bent using the Knipex 35 82 145.
With the Knipex 35 82 145, mechanical components are held securely without damaging materials.
Knipex electronics pliers for electronics and precision engineering.
Knipex offers an extensive range of electronics pliers for applications in precision engineering and electronics.
These pliers in a small format achieve a lot where there is little space - and do so for a long time.
Every pair of Knipex pliers represents more than 130 years of specialist know-how.

 

• Handles: with multi-component grips
• Head : mirror polished
• Head Angle: 45°
• Head Width: 12 mm
• height: 19 mm
• Jaw Angle: Angled jaws, 45°
• Jaw Length: 35 mm
• Jaw Thickness: 7.5 mm
• Jaw Type: half-round jaws
• Joint Type: box joint
• length: 145 mm
• RoHs: No
• Standard DIN: DIN ISO 9655
• Style: 45° bent, half-round, long jaws
• Tip Thickness: 1 mm
• Tip Width: 2.5 mm
• Weight: 102 g
• width: 59 mm