KNIPEX 35 32 115 - Electronics Pliers head mirror polished, handles with multi-component grips

Electronics Pliers head mirror polished, handles with multi-component grips.
Precision pliers for fine assembly work, e g. in electronics and fine mechanics.
Load-optimised for a more direct feel when working.
For gripping, holding and bending.
Sturdy, zero backlash box joint.
Smooth ground gripping surfaces.
Soft transitions.
No sharp edges.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger.
Ball bearing chrome steel.

Small and fine: electronics pliers for fine installation work.
Short, smooth and good: 115 mm long for plenty of freedom of movement even where space is restricted.
There is usually little room to move when working on electronic equipment, printed circuit boards or precision constructions such as measuring equipment and delicate apparatus.
A compact tool that enables you to work well even in poorly accessible areas is helpful here.
With a length of just 115 mm and their slim, flat head, the 35 32 115 electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components.
The round gripping surfaces are smooth ground to protect sensitive surfaces.
Smooth operating and accurate, with box joint design and double spring.
The smaller and more sensitive the component being worked on, the greater the challenges placed on pliers.
The accurate, well-measured transmission of manual force to the component is vital.
The mechanics of the Knipex 35 32 115 are very finely adjusted.
The box joint is solid and smooth operating, because the inner handle is guided on both sides by the outer handle.
This ensures precise running without any tilting effect.
The low friction double spring supports the gentle opening of the pliers.
The handles of the Knipex 35 32 115 electronics pliers are forged from special tool steel, oil-hardened, carefully deburred, mirror-polished and completed with opening spring and rivet to produce gripping pliers.
The rust protection also provides a high level of safety.
These electronics pliers have a corrosion resistance that is safe for circuits: safe because there is no chrome-plating, so that no pieces of chrome can peel off and fall onto printed circuit boards.
The mirror polish in conjunction with a fine oil film provides perfectly adequate corrosion protection for the pliers during workshop use.
It is sufficient for the oil film to be replaced occasionally.
High Knipex quality standards and safety rust protection.
Knipex electronics pliers for electronics and precision engineering.
Even very sensitive areas such as a toothed wheel centre bore can be gripped and held gently.
Small springs can be securely held, clamped and fed using the precisely machined tips.
Delicate ends of components and solder contacts can be accurately aligned using the Knipex 35 32 115.
Knipex offers an extensive range of electronics pliers for applications in precision engineering and electronics.
These pliers in a small format achieve a lot where there is little space - and do so for a long time.
Those who use tools a lot and professionally every day expect a quality that permits simple and safe work and which lasts for many years of hard use.
Every pair of Knipex pliers represents more than 130 years of specialist know-how.

 

• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 17 mm
• Jaw Length: 22.5 mm
• Jaw Thickness: 6.5 mm
• Jaw Type: round jaws
• Joint Type: box joint
• length: 115 mm
• RoHs: No
• Standard DIN: DIN ISO 9655
• Tip Thickness: 1 mm
• Tip Width: 2 mm
• Weight: 77 g
• width: 70 mm