KNIPEX 64 52 115 - Electronics End Cutting Nipper head mirror polished, handles with multi-component grips, Oblique End Cutter, short head

Electronics End Cutting Nipper head mirror polished, handles with multi-component grips, Oblique End Cutter, short head.
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics.
Sturdy, zero backlash box joint.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Cutting edges additionally induction-hardened, cutting edge hardness at least 56 HRC.
cutter head: special high-grade tool steel, forged, oil-hardened.

Knipex End cutting nippers - precision for electronics and precision engineering.
For cutting fine wire and cable from the front at an angle of 27° to the surface.
Cut at an angle of 27° to the surfaceIn tight spaces, e.g. on printed circuit boards, cutting is often best done from above.
With the Knipex 64 52 115 electronics end cutting nippers, work is possible at an angle to surfaces from which wire, cable or components are protruding.
Unlike with diagonal cutters, where the cutting edges are a relatively straight extension of the handle, the cutting edges of the electronics end cutting nippers are at an angle of 27° to the handles.
The power delivery to the cutting edges and the measuring of manual force are both excellent thanks to the good leverage resulting from the short pliers head.
Because the 64 52 115 electronics end cutting nippers have no external bevel, flush cutting is possible.
Due to their design, these electronics end cutting nippers are only suitable for soft wire.
These Knipex electronics end cutting nippers have a smooth operating box joint with zero backlash.
Box joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces in the outer handle.
This prevents the tilting movements which occur with lap joints, and has a positive effect on the quality of cutting processes and tool life.
In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 56 HRC.
The low friction double spring is an advantage ergonomically.
It produces a gentle, steady opening after cutting.
Sophisticated design - designed for ergonomics and durability.
Instead of chrome-plating, the Knipex 64 52 115 end cutting nippers have a mirror polish and a fine oil film as corrosion protection.
With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation.
As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments.
There are no pieces of chrome that could peel off and damage circuits.
The quality machining of the pliers meets the requirements present in electronics and micromechanics: precision, function and reliability are at the top of the list.
High Knipex quality standards and safety rust protection.
Knipex offers an extensive range of end cutting nippers for applications in electronics and precision engineering.
They are characterised by high precision and functionality - and the long life that Knipex stands for.
Those who use tools a lot and professionally every day expect a quality that permits simple and safe work and which lasts for many years of hard use.
These electronic end cutting nippers are forged from quality materials, carefully machined and heat treated.
Every pair of Knipex pliers represents more than 130 years of specialist know-how.

 

• Bevel: cutting edges without bevel
• Blade length: 12 mm
• Cutting Capacities Soft Wire: 1.3 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Angle: 27°
• Head Width: 11 mm
• height: 17 mm
• Jaw Angle: Angled jaws, 27°
• Jaw Length: 10 mm
• Jaw Thickness: 7 mm
• Joint Type: box joint
• length: 115 mm
• RoHs: No
• Standard DIN: DIN ISO 9654
• Style: Oblique End Cutter, short head, without bevel, for flush cutting, a 27°
• Weight: 76 g
• width: 68 mm