KNIPEX 77 02 120 H - Electronics Diagonal Cutter with carbide cutting edges head mirror polished, handles with multi-component grips, round head

Electronics Diagonal Cutter with carbide cutting edges head mirror polished, handles with multi-component grips, round head.
Sturdy, zero-backlash box joint.
For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries.
Always the right cutting tool, even with the hardest material.
Precision carbide metal cutting edges soldered into forged blanks.
Hardness of the carbide cutting edges 80 – 83 HRC.
Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges.
Constantly reliable cutting results due to the avoidance of cutter deformations.
High cost saving due to longer service life of the pliers.

Cut hard wires with precision - including piano, nickel, tungsten and diode wire.
Compact in dimensions - exceptional in cutting performance.
In contrast to other diagonal cutters for electronics, these electronics diagonal cutters from Knipex are a combination of precision tool and high-performance pliers.
The precision carbide cutters used are also suitable for particularly hard and tough wire types.
With a length of 120 mm and 85 g, the electronics side cutter 77 02 120 H is compact and light: ideal for tight spaces, e.g. on printed circuit boards or in protective housings.
Due to the short pliers head, there is a strong leverage effect.
This results in excellent conditions for the development of power on the cutting edges and the dosing of manual force.
Thanks to the impressive cutting edge hardness of 80 - 83 HRC, it cuts soft wire up to ø 2.0 mm, hard wire up to ø 1.0 mm and spring steel wire (e.g. piano, nickel, tungsten and diode wire) up to ø 0.6 mm.
The joint of the electronics side cutter Knipex 77 02 120 H is pushed through, smooth-running and free of play.
With box joints, the inner pliers handle is guided on both sides by two large bearing surfaces in the outer pliers handle.
This avoids tilting movements that occur when the pliers joints are in place.
The rivets are only loaded in shear, but not in bending.
This leads to a high quality of the cutting operations and a long service life.
With a cutting edge hardness of 80 - 83 HRC, the carbide cutting edges far exceed the cutting values ​​and service life of conventional cutting pliers.
For optimum durability, they are soldered into the forged pliers blank.
The low-friction double spring is ergonomically advantageous.
It supports gentle and even opening after the cutting process.
Push-through, play-free joint.
With the Knipex 77 02 120 H electronics side cutter, there are no chrome particles that could flake off and disrupt circuits, because the pliers are not chrome-plated.
Instead of chrome plating, these electronics side cutters are mirror polished to protect against corrosion.
In connection with a fine film of oil, this rust protection is completely sufficient in workshop operation with occasional re-oiling of the surface.
High Knipex quality standards and safety rust protection.
The high-quality workmanship of the Knipex 77 02 120 H electronics side cutter - forged and oil-hardened - meets the requirements of electronics and precision engineering: precision, function and reliability are the top priorities.
These pliers, manufactured with great attention to detail, are also ideal for safety reasons for sensitive environments in electronics, e.g. when working on printed circuit boards.
High cutting power, long service life.
The electronics side cutter Knipex 77 02 120 H cuts hard wire up to ø 1.0 - also piano, nickel, tungsten and diode wire.
Electronics side cutter "H" with high performance e.g. for the aerospace industry.
Knipex offers an extensive range of box-type electronics side cutters for applications in electronics, precision engineering - and with the models that use a precision carbide cutting edge, also for applications in the aerospace industry, for example.
These pliers are characterized by high precision and functionality - and the proverbial Knipex durability.
Anyone who works professionally and a lot with tools every day expects a quality that enables easy and safe work and lasts for many years of hard use.
Every pair of pliers from Knipex contains more than 130 years of specialist know-how.

 

• Bevel: cutting edges with bevel
• Handles: with multi-component grips
• Head : mirror polished
• Joint Type: box joint
• RoHs: No
• Standard DIN: DIN ISO 9654
• width: 50 mm