KNIPEX 77 32 120 H ESD - Electronics Diagonal Cutter with carbide cutting edges head mirror polished, handles with multi-component grips, pointed head with chamfer ESD

Electronics Diagonal Cutter with carbide cutting edges head mirror polished, handles with multi-component grips, pointed head with chamfer ESD.
Electrically discharging handles - dissipative.
Sturdy, zero-backlash box joint.
For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries.
Always the right cutting tool, even with the hardest material.
Precision carbide metal cutting edges soldered into forged blanks.
Hardness of the carbide cutting edges 80 – 83 HRC.
Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges.
Constantly reliable cutting results due to the avoidance of cutter deformations.
High cost saving due to longer service life of the pliers.

Cut hard wire - also piano, nickel, tungsten and diading wire.
Compact in the dimensions - extremely in the cutting performance.
With 120 mm length and only 80 g of weight, the electronics side cutter Knipex 77 32 120 H ESD is very compact and lightweight.
That makes him ideal for cramped space, as they are given to printed circuit boards or in protective housings.
In addition, this electronics side cutter is fine tool and high-performance clamp at the same time.
The precision carbide cuttings used are also suitable with the cutting hardness of 80 to 83 HRC for particularly hard and tough wire types.
The electronics side cutter Knipex 77 32 120 H ESD cuts soft wire up to ø 1.6 mm, hard wire up to ø 0.6 mm and piano wire up to ø 0.2 mm.
Due to the short pliers head, there is a strong leverage.
For the combination of force on the cutting and the dosage of the hand force thus excellent conditions are given.
The connected joint of the electronics side cutter Knipex 77 32 120 H ESD is smooth and play-free.
The inner pliers leg is led here by two large-area bearing surfaces in the outer pliers legs on both sides.
Typical tilting movements with applied forceps are avoided with staggered joints.
The rivets are only burdened on shear, but not on bend.
This leads to a high quality of the cutting operations and too long life.
The carbide cutting with the cutting hardness of 80 - 83 HRC exceeds the cutting values ​​of conventional cutting pliers by far.
For highest durability, they are soldered in the forged plane blank.
Ergonomically advantageous is the low-friction double spring.
It supports the gentle and uniform opening after the cutting process.
Stretched, play-free joint.
High cut quality and long durability.
Sudden discharges due to electrostatic charge differences are feared in electronics because they can damage electronic components.
In the electronics side cutter Knipex 77 32 120 H ESD, the electrostatic energy is derived evenly and controlled via the handles.
This is possible because the handles are conductive - so not stress-insulating.
This creates a slower, safe charge compensation.
The rust protection is harmless for sensitive electronic components.
Instead of a chrome plating, the electronics side cutter Knipex 77 32 120 H ESD receives a mirror polish and a fine oil film for protection against corrosion.
Thus, the risk of disturbances on printed circuit boards is excluded by filling chrome parts.
The mirror polish protects the pliers in conjunction with a fine oil film for the workshop operation completely sufficiently against corrosion when the oil film is randomly renewed.
Electronics side cutter "H" with particularly high cutting performance.
KNIPEX offers a comprehensive range of plugged electronics side cutters for applications in electronics, precision mechanics - and with the models in which a precision carbide cutting edge is used, also for applications e.g. in the aerospace industry.
These pliers are characterized by high precision and functionality - and the long proverbial Knipex durability.
Who works a daily professionally and a lot of tools, expects a quality that allows easy and safe to work and keeps many hard years.
In every pliers from Knipex are over 130 years specialist know-how.

 

• Bevel: cutting edges with small bevel
• Cutting Capacities Hard Wire: 0.6 mm
• Cutting Capacities Medium-Hard Wire: 1 mm
• Cutting Capacities Piano Wire: 0.2 mm
• Cutting Capacities Soft Wire: 1.6 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 19 mm
• Jaw Length: 14 mm
• Jaw Thickness: 7 mm
• Joint Type: box joint
• length: 120 mm
• RoHs: No
• Standard DIN: DIN EN 61 340-5, DIN ISO 9654
• Weight: 95 g
• width: 50 mm