KNIPEX 77 32 120 H - Electronics Diagonal Cutter with carbide cutting edges head mirror polished, handles with multi-component grips, pointed head with chamfer

Electronics Diagonal Cutter with carbide cutting edges head mirror polished, handles with multi-component grips, pointed head with chamfer.
Sturdy, zero-backlash box joint.
For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries.
Always the right cutting tool, even with the hardest material.
Precision carbide metal cutting edges soldered into forged blanks.
Hardness of the carbide cutting edges 80 – 83 HRC.
Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges.
Constantly reliable cutting results due to the avoidance of cutter deformations.
High cost saving due to longer service life of the pliers.

Cut hard wires precisely - even piano, nickel, tungsten and diading wire.
Compact in the dimensions - extremely in the cutting performance.
In contrast to other side cutters for the electronics, this electronics side cutter from Knipex is a combination of fine tools and high-performance pliers.
The precision carbide cuttings used are also suitable with the cutting hardness of 80 to 83 HRC for particularly hard and tough wire types.
With 135 mm length and 115 g of weight, this electronic side cutter is compact and lightweight: ideal for cramped space, e.g. on printed circuit boards or in protective housings.
Thanks to the cutting hardness of 80 - 83 HRC, it cuts soft wire up to ø 1.6 mm, hard wire up to ø 0.6 mm and piano wire up to ø 0.2 mm.
Due to the short pliers head, there is a strong leverage.
For the combination of force on the cutting and the dosage of the hand force thus excellent conditions are given.
Stretched, play-free joint.
High cut quality and long durability.
The connected joint of the electronics side cutter Knipex 77 32 120 H is smooth and play-free.
Punched joints offer decisive advantages.
The inner pliers leg is led here by two large-area bearing surfaces in the outer pliers legs on both sides.
While tilting movements occur during pliers joints, they are avoided with staggered joints.
The rivets are only burdened on shear, but not on bend.
This leads to a high quality of the cutting operations and too long life.
The carbide cutting with the cutting hardness of 80 - 83 HRC exceeds the cutting values ​​of conventional cutting pliers by far.
For highest durability, they are soldered in the forged plane blank.
Ergonomically advantageous is the low-friction double spring.
It supports the gentle and uniform opening after the cutting process.
Precision, function and reliability are in the electronics in the requirements of the front tool.
The high-quality processing of the electronics side cutter KNIPEX 77 32 120 H - forged and oil cured - corresponds to these high requirements.
The pliers made with great care for the detail is also ideal for safety reasons for sensitive environments in the electronics.
Here, circuits can not be disturbed by filling chrome particles because the electronics side cutter Knipex 77 32 120 H is not chromed.
Thus, it is also possible to work on printed circuit boards without such risks.
To protect against corrosion, this electronic side cutter receives a mirror polish instead of a chrome plating.
In conjunction with a fine oil film, this rust protection is completely sufficient in the workshop operation with occasional peeling of the surface.
High KNIPEX quality standards and security contact protection.
KNIPEX offers a comprehensive range of plugged electronics side cutters for applications in electronics, precision mechanics - and with the models in which a precision carbide cutting edge is used, also for applications e.g. in the aerospace industry.
These pliers are characterized by high precision and functionality - and the long proverbial Knipex durability.
Who works a daily professionally and a lot of tools, expects a quality that allows easy and safe to work and keeps many hard years.
In every pliers from Knipex are over 130 years specialist know-how.
Cutting hardness 80 - 83 Hrchohe cutting force, long service life: Precision carbide cutting are soldered into the forged blanks.
For high industrial demanding electronics side cutters Knipex 77 02 120 H cuts hard wire up to ø 1.0 - also piano, nickel, tungsten and diading wire.

 

• Bevel: cutting edges with small bevel
• Cutting Capacities Hard Wire: 0.6 mm
• Cutting Capacities Medium-Hard Wire: 1 mm
• Cutting Capacities Piano Wire: 0.2 mm
• Cutting Capacities Soft Wire: 1.6 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 19 mm
• Jaw Length: 14 mm
• Jaw Thickness: 7.5 mm
• Joint Type: box joint
• length: 120 mm
• RoHs: No
• Standard DIN: DIN ISO 9654
• Weight: 95 g
• width: 50 mm