KNIPEX 77 72 115 ESD - Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed mini-head, with small bevel ESD

Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed mini-head, with small bevel ESD.
Electrically discharging handles - dissipative.
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics.
Sturdy, zero backlash box joint.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Cutting edges additionally induction-hardened.
Round head, with bevel.
Cutting edge hardness approx. 62 HRC.
cutter head: special high-grade tool steel, forged, oil-hardened.

Fine, soft wires and cable precisely cut - up to ø 0.8 mm.
The pliers with pointed mini head and cutting with small facet.
The electronics side cutter 77 72 115 ESD from Knipex is unlike side cutters for the house installation a real fine tool.
He is very compact and easy with 115 mm length and 69 g of weight.
The Lace Mini Head makes this ESD side cutter ideal for cramped space, as you can find on electronics printed circuit boards.
With the cutting hardness of about 60 HRC he cuts soft wire up to ø 0.8 mm.
Due to the short pliers head, there is a strong leverage.
For the combination of force on the cutting and the dosage of the hand force thus excellent conditions are given.
Design due to the electronics side cutter 77 72 115 ESD is not suitable for medium hard or hard wire - exclusively for soft wire.
The joint of the electronics side cutter KNIPEX 77 72 115 ESD is incremented, smooth and play-free.
In staggered joints, the inner pliers leg is guided on both sides by two large-area bearing surfaces in the outer pliers leg.
Tilting movements, as they occur with applied pliers, are avoided.
The rivets are only burdened on shear, but not on bend.
This leads to a high quality of the cutting operations and too long life.
The cutting are additionally hardened to about 60 HRC inductively to the oil hardening of the entire pliers.
Ergonomically advantageous is the low-friction double spring.
It supports the gentle and uniform opening after the cutting process.
Stretched, play-free joint.
High cut quality and long durability.
Holly discharges due to electrostatic charge differences are specially dreaded in electronics because they can damage electronic components.
The electronics side cutter Knipex 77 72 115 ESD offers protection here.
He directs electrostatic energy evenly and controlled by handles.
The handles are conductive, so not stress-insulating.
This makes a slower, safe charge compensation possible.
The rust protection is harmless for sensitive electronic components.
To protect against corrosion, the electronics side cutter Knipex 77 72 115 ESD rather than chrome plating a mirror polish and a fine oil film.
Therefore, no chrome parts can spare and fall on printed circuit boards.
The mirror polish protects the pliers in conjunction with a fine oil film for the workshop operation completely sufficiently against corrosion when the oil film is randomly renewed.
They are characterized by high precision and functionality - and long proverbial Knipex durability.
Who works a daily professionally and a lot of tools, expects a quality that allows easy and safe to work and keeps many hard years.
Punched Knipex electronics side cutters are forged from special tool steel in special quality, carefully handled and material-friendly.
In every pliers from Knipex are over 130 years specialist know-how.

 

• Bevel: cutting edges with small bevel
• Cutting Capacities Soft Wire: 0.3 - 0.8 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 17 mm
• Jaw Length: 10.5 mm
• Jaw Thickness: 6 mm
• Joint Type: box joint
• length: 115 mm
• RoHs: No
• Standard DIN: DIN EN 61 340-5, DIN ISO 9654
• Weight: 74 g
• width: 65 mm