KNIPEX 77 42 115 ESD - Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed head, without bevel ESD

Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed head, without bevel ESD.
Electrically discharging handles - dissipative.
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics.
Sturdy, zero backlash box joint.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Cutting edges additionally induction-hardened.
Round head, with bevel.
Cutting edge hardness approx. 62 HRC.
cutter head: special high-grade tool steel, forged, oil-hardened.

Fine wires and cables Precise cutting - soft wire until ø 1.3 mm.
Funny cutting; Also possible flat separation possible.
In contrast to side cutters for the house installation, this electronics side cutter from Knipex is a real fine tool.
It is extremely compact and light with 115 mm in length and 78 g of weight: ideal for cramped space, e.g. on printed circuit boards or when working on precision mechanical constructions.
The strong leverage and the comparatively low effort when cutting are conditioned by the short pliers head.
For the combination of force on the cutting and the dosage of the hand force there are thus excellent conditions.
Design due to the electronics side cutter 77 42 115 ESD is not suitable for hard, but only for soft and medium-hard wire.
Since the cutting do not have a facet, surface simultaneous separation is possible.
The joint of the electronics side cutter KNIPEX 77 42 115 ESD is pushed through.
What are the advantages of purlized joints?
In staggered joints, the inner pliers leg is guided on both sides by two large-area bearing surfaces in the outer pliers leg.
Tilting movements, as they occur with applied pliers, are avoided.
The rivets are only burdened on shear, but not on bend.
Among other things, this leads to the high quality of the cutting operations and the long life, known for which KNIPEX is known.
The cutting are in addition to the oil hardening of the entire pliers inductively hardened to about 57 HRC.
To support the gentle and uniform opening of the pliers after the cutting process, a low-friction double spring is integrated.
Stretched, play-free joint.
Especially in the electronics sudden discharges are feared due to electrostatic charge differences.
The electronics side cutter Knipex 77 42 115 ESD directs electrostatic energy evenly and controlled via the handles.
The handles of this side cutter are conductive - that is not stress-insulating.
As a result, the slow and thus harmless charge compensation is possible.
The rust protection is harmless for sensitive electronic components.
The electronics side cutter KNIPEX 77 42 115 ESD gives instead of a chrome plating a mirror polish and a fine oil film for protection against corrosion.
Therefore, no chrome parts can spare and fall on printed circuit boards.
The mirror polish protects the pliers in conjunction with a fine oil film for the workshop operation completely sufficiently against corrosion when the oil film is randomly renewed.
Knipex offers a comprehensive range of plugged electronics side cutters for applications in electronics and precision mechanics.
They are characterized by high precision and functionality - and long proverbial Knipex durability.
Who works a daily professionally and a lot of tools, expects a quality that allows easy and safe to work and keeps many hard years.
Punched Knipex electronics side cutters are forged from special tool steel in special quality, carefully handled and material-friendly.
In every pliers from Knipex are over 130 years specialist know-how.

 

• Bevel: cutting edges without bevel
• Cutting Capacities Medium-Hard Wire: 0.8 mm
• Cutting Capacities Soft Wire: 0.3 - 1.3 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 17 mm
• Jaw Length: 14 mm
• Jaw Thickness: 7 mm
• Joint Type: box joint
• length: 115 mm
• RoHs: No
• Standard DIN: DIN EN 61 340-5, DIN ISO 9654
• Weight: 76 g
• width: 67 mm