KNIPEX 77 32 115 ESD - Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed head, with small bevel ESD

Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed head, with small bevel ESD.
Electrically discharging handles - dissipative.
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics.
Sturdy, zero backlash box joint.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Cutting edges additionally induction-hardened.
Round head, with bevel.
Cutting edge hardness approx. 62 HRC.
cutter head: special high-grade tool steel, forged, oil-hardened.

Fine wires and cables Precise cutting - soft wire until ø 1.3 mm.
Small in the dimensions - large in cutting performance.
In contrast to side cutters for the house installation, this electronics side cutter from Knipex is a real fine tool.
Thanks to a pointed head you can reach with it components and wires on tight printed circuit boards.
The electronics side cutter 77 32 115 ESD from KNIPEX is very compact and lightweight with 115 mm and 79 g of weight.
Its cutting performance is still impressive thanks to 60 HRC cutting hardness.
Soft wire cuts up to ø 1.3 mm, hard wire up to ø 0.5 mm.
The cheap for cutting, strong leverage is thanks to a short pliers head.
These are excellent conditions for the combination of force on the cutting and the dosage of the hand force.
The joint of the electronics side cutter KNIPEX 77 32 115 ESD is pushed through, smooth and play-free.
In staggered joints, the inner pliers leg is guided on both sides by two large-area bearing surfaces in the outer pliers leg.
Tilting movements, as they occur with applied pliers, are avoided.
The rivets are only burdened on shear, but not on bend.
This leads to a high quality of the cutting operations and too long life.
The cutting are additionally hardened to about 60 HRC inductively to the oil hardening of the entire pliers.
Ergonomically advantageous is the low-friction double spring.
It supports the gentle and uniform opening after the cutting process.
Especially in the electronics, sudden discharges are feared due to electrostatic charge differences.
In the electronics side cutter Knipex 77 32 115 ESD, the electrostatic energy is derived evenly and controlled via the handles.
The handles are conductive - that is not stress-insulating.
This makes a slower, safe charge compensation possible.
Safe for sensitive electronic components is also the rust protection.
The electronics side cutter Knipex 77 32 115 ESD gives instead of a chrome plating a mirror polish and a fine oil film for protection against corrosion.
The risk of disturbances on printed circuit boards by filling chrome parts is thus excluded.
The mirror polish protects the pliers in conjunction with the fine oil film for the workshop operation completely sufficiently against corrosion when the oil film is randomly renewed.
Knipex offers a comprehensive range of plugged electronics side cutters for applications in electronics and precision mechanics.
They are characterized by high precision and functionality - and long proverbial Knipex durability.
Who works a daily professionally and a lot of tools, expects a quality that allows easy and safe to work and keeps many hard years.
In every pliers from Knipex are over 130 years specialist know-how.

 

• Bevel: cutting edges with small bevel
• Cutting Capacities Hard Wire: 0.5 mm
• Cutting Capacities Medium-Hard Wire: 1 mm
• Cutting Capacities Soft Wire: 0.3 - 1.3 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 17 mm
• Jaw Length: 14 mm
• Jaw Thickness: 7 mm
• Joint Type: box joint
• length: 115 mm
• RoHs: No
• Standard DIN: DIN EN 61 340-5, DIN ISO 9654
• Weight: 76 g
• width: 67 mm