KNIPEX 77 32 115 - Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed head, with small bevel

Electronics Diagonal Cutter head mirror polished, handles with multi-component grips, pointed head, with small bevel.
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics.
Sturdy, zero backlash box joint.
Low-friction double spring for gentle and even opening.
The polish or mirror polish (only finish 2) together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
Cutting edges additionally induction-hardened.
Round head, with bevel.
Cutting edge hardness approx. 62 HRC.
cutter head: special high-grade tool steel, forged, oil-hardened.

Fine wires and cables Precise cutting - soft wire until ø 1.3 mm.
Small in the dimensions - large in cutting performance.
In contrast to side cutters for the house installation, this electronics side cutter from Knipex is a real fine tool.
Spitzer head, 115 mm length and 80 g Weight: Ideal dimensions for work also under cramped space, as they are given on printed circuit boards or in precision mechanical constructions.
Thanks to the cutting hardness of approx. 60 HRC cuts the electronics side cutter Knipex 77 32 115 soft wire up to ø 1.3 mm and hard wire up to ø 0.5 mm.
Due to the short pliers head, there is a strong leverage.
For the combination of force on the cutting and the dosage of the hand force there are therefore excellent conditions.
The joint of the electronics side cutter KNIPEX 77 32 115 is incremented, smooth and play-free.
Convince the properties and advantages of incremented joints.
In staggered joints, the inner pliers leg is guided on both sides by two large-area bearing surfaces in the outer pliers leg.
Thus, tilting movements are avoided, as they occur with applied pliers joints.
The rivets are only burdened on shear, but not on bend.
This tongs construction leads to a particularly high quality of the cutting operations and too long life.
The cutting are additionally hardened to about 60 HRC inductively to the oil hardening of the entire pliers.
The gentle and uniform opening after the cutting process is supported by the low-friction double spring.
In frequent cutting, this is a noticeable relief for the user.
Stretched, play-free joint.
High cut quality and long durability.
Precision, function and reliability are the most important aspects of manufacturing.
For security reasons, this electronics side cutters made with great care for the detail is ideal for sensitive environments in electronics.
Particularly important is at work on printed circuit boards that do not blow chrome particles and disturb circuits.
The electronics side cutter Knipex 77 32 115 is not chromed.
Instead of chrome plating, it receives a mirror polish for protection against corrosion.
In conjunction with a fine oil film, this rust protection is completely sufficient in the workshop operation with occasional peeling of the surface.
They are characterized by high precision and functionality - and long proverbial Knipex durability.
Who works a daily professionally and a lot of tools, expects a quality that allows easy and safe to work and keeps many hard years.
In every pliers from Knipex are over 130 years specialist know-how.

 

• Bevel: cutting edges with small bevel
• Cutting Capacities Hard Wire: 0.5 mm
• Cutting Capacities Medium-Hard Wire: 1 mm
• Cutting Capacities Soft Wire: 0.3 - 1.3 mm
• Handles: with multi-component grips
• Head : mirror polished
• Head Width: 11 mm
• height: 17 mm
• Jaw Length: 14 mm
• Jaw Thickness: 7.5 mm
• Joint Type: box joint
• length: 115 mm
• RoHs: No
• Standard DIN: DIN ISO 9654
• Weight: 75 g
• width: 66 mm