KNIPEX 72 01 140 - Diagonal Cutter for plastics head polished, handles plastic coated

Diagonal Cutter for plastics head polished, handles plastic coated.
Cutting face flush.
Non-bevelled, for separating moulded plastic components from sprues.
With opening spring.
For nearly flush cutting of moulded plastic components from sprues.
Vanadium electric steel.
Forged, oil-hardened.

Compact diagonal cutters for plastic and other soft materials.
Why special diagonal cutters for plastic are necessary.
The cutting edges of diagonal cutters used for wire are ground to produce a wedge-shaped cut towards the centre of the cut product.
This wedge ultimately splits the cut material apart, and the wire ends separated in this way have wedge-shaped cut surfaces.
A flush, smooth cut is desired when separating moulded parts and sprues, however, in order to create as little finishing work as possible when deburring.
Diagonal cutters used here must not have any bevel towards the component to create a straight cut surface.
The Knipex 72 01 xxx diagonal cutters have been specially developed for plastics and other soft materials.
Their cutting edges are surface ground.
The Knipex 72 01 xxx diagonal cutters are used when moulded parts need to be mechanically separated from sprue after demoulding.
Their surface ground cutting faces produce a clean, flush separation.
The sprue is cut off directly on the moulded part, because the cutting edge runs flat on the component.
For flush deburring after injection moulding.
In many cases, work steps in production processes such as plastic injection moulding repeat.
Users who frequently separate sprues from moulded parts therefore appreciate the opening spring on the 72 01 xxx.
We forge the 72 01 xxx diagonal cutters from vanadium electric steel and give them high strength by heating and then quenching them in oil.
With opening spring to relieve strain on the user - compact and stableIn many cases, work steps in production processes such as plastic injection moulding repeat.
One can see how good diagonal cutters are by the cut.
This also applies when cutting plastic.
In addition to the quality forged parts made from vanadium electric steel, the most important quality criteria at Knipex include the accurate machining of the tool steel manufactured in Germany.
The material is cut flush using the surface ground cutting edges.
Thanks to their long tool life, Knipex diagonal cutters for plastic continuously deliver accurate cuts.

 

• Bevel: cutting edges without bevel
• Handles: plastic coated
• Head : polished
• RoHs: No