FISCHER 554404 - Universal insulation anchor FIF-SV II

Anchor for coats FIF-SV II
Universal anchor for insulation panels.
* One size for coats from 100 to 400 mm in EPS or wool or mineral.
* Screwing disappearing without cutter

Support materials:
* Concrete.
* Bricks solid and semisolid (drilled vertically) calcium silicate.
* Bricks clay.
* Blocks solid and hollow lightweight concrete.
* Lightweight Concrete.
* Aerated autoclave (cellular).

For:
* Natural stone with compact structure.

Advantages:
* A single gusset for all insulation panels from 100 mm to 400 mm thick.
* Less waste of space in the warehouse, no waste of time in choosing, no mishap in the pipeline, increased productivity.
* Calculation of extremely simple mounting depth through a dedicated tool, which is available in two sizes for insulation up to 260 mm and insulation up to 400 mm.
* Special high for fixing helix geometry recessed retractable without cutter.
* Quick cut insulation no dirt, no relief on the coat surface.
* Installation of small size hole, quickly sealable with foam or polystyrene caps (included).
* The installation in depth leads to minimum thermal transmittance values.
* Suitable for polystyrene panels and compact mineral wool.
* Secure attachment with ETA certification for class materials A, B, C, D, E.
* The expansion length of 35 mm is suitable for all common building materials.

Applications:
* Hidden fixing without thermal bridge insulating panels made of mineral wool or EPS from 100 to 400 mm thick.
* Fixing of thermal insulation panels on concrete; solid and semisolid bricks (vertically perforated) calcium silicate; clay bricks; solid and perforated blocks of lightweight concrete; autoclaved aerated concrete (cellular).

Function:
* Adjust the mounting tool according to the insulation thickness;
* Locate the fixing points in accordance with the designer's plans and notrmativa;
* Drill holes in the masonry with a depth of hD (insulation thickness) + 75 mm, as indicated in the technical data table;
* Place the tasselo FIF-SV II in the hole;
* Screw the dowel through the tool suitably adjusted;
* IMPORTANT: To allow the correct insertion propeller insulation is necessary to apply a firm pressure in the initial phase dell'avvitamento;
* The fastener is fully installed when the lock indicator ring mounted on the tool rests on the outer surface of the insulation.
* IMPORTANT: When the ring rests on the insulator surface, stop screwing.
* After the installation control, the tool can be removed and the hole closed with polyurethane foam or with the cap in polystyrene.
* Drilling holes in masonry we recommend the use of the tip SDS Plus 8/100/400 (see p. 633) equipped with plate carbide sharpened and SDS Plus geometry optimized for reducing the impact in case of a puncture in rotopercussion .

 

• Anchor length [mm]: 202
• Anchorage depth [mm]: min. 35
• Insulation thickness: 100 - 400