Share
reply Back
FISCHER Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15° - 1
List Price
$ 28.97
Save 29%
Mister Worker™ Price
$ 20.43 VAT Excluded?
List Price
$ 28.97 Save 29%
Mister Worker™ Price
$ 20.43 VAT Excluded?

FISCHER 547027 - Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15°

EAN: 8001132094884
FISCHER Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15° - 1
List Price
$ 28.97
Save 29%
Mister Worker™ Price
$ 20.43 VAT Excluded?
List Price
$ 28.97 Save 29%
Mister Worker™ Price
$ 20.43 VAT Excluded?
EAN: 8001132094884
System Solar-Wind South II Flat roof system with tilt 10 ° -15 ° and oriented panels in the South Benefits: * No hole in the roof: the Solar-Wind South II system is locked with small modular...
  • FISCHER Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15° - 1
  • FISCHER Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15° - 3
  • FISCHER Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15° - 4
  • FISCHER Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15° - 5
Code
Pieces per pack
number of packs
Total pieces
Availability
Price (Vat Excl.) ?
Quantity
547027
1
1
1
Checking availability...
$ 28.97
$ 20.43
Code 547027
thread M 8
Weight [g] 1160
Suitable for Solar-Wind II South 15 °
Thickness [mm] 6
Pieces per pack 1
number of packs 1
Total pieces 1
Availability Checking availability...
Price
$ 20.43
Quantity
System Solar-Wind South II
Flat roof system with tilt 10 ° -15 ° and oriented panels in the South

Benefits:
* No hole in the roof: the Solar-Wind South II system is locked with small modular ballast concrete.
* Fast: the installation time for the Solar-Wind South II system is 30 minutes per kWp per pair of operators.
* Lightweight: the reduced inclination of the panels (10 ° and 15 °) and the presence of the crankcase reduce the effect of the action of the wind on the system, and then the number of weights in coverage.
* Complete: The system is suitable for a wide range of panels (width 950 ÷ 1050 mm x height 1559 ÷ 1690 mm).
* Versatile: the system is modular, allowing an extremely flexible panels layout.
* Electrically Safe: special center and end terminals allow the grounding of the system.
* Tested: tested in the wind tunnel up to 240 km / h.

Versions:
* Aluminum brackets AW 6060 T66 / T5 according to EN 755-2: 2013
* A2-70 stainless steel bolts to EN ISO 3506-1 / 2: 2009

Suitable for:
* Flat roof without drilling

Possible configurations:
* Single module horizontally

Function:
* Define the installation layout taking into account the distances to cover edges and obstacles.
* Define the number of weights (to be purchased separately) to use for each individual element (brackets or port ballast) as a function of the snow and wind loads of the installation area of ​​the plant, according to the national regulations.
* Place the front brackets SW-II BF and the brackets SW-II S-B (intermediate and final) on the cover, according to the project.
* Place the solar panels on the brackets and secure them using the terminals SW and SW-MC-II-II-MF.
* Fix the crankcase SW-II S CARTER on intermediate brackets SW-II BM-S and SW-II-S BE end to reduce the effect of the action of the wind.
* Place the ballast as designed.
* Protecting cover interposing the protective bearings SW-II PAD under the ballast.

 

  • Suitable for: Solar-Wind II South 15 °
  • Thickness [mm]: 6
  • thread: M 8
  • Weight [g]: 1160
System Solar-Wind South II
Flat roof system with tilt 10 ° -15 ° and oriented panels in the South

Benefits:
* No hole in the roof: the Solar-Wind South II system is locked with small modular ballast concrete.
* Fast: the installation time for the Solar-Wind South II system is 30 minutes per kWp per pair of operators.
* Lightweight: the reduced inclination of the panels (10 ° and 15 °) and the presence of the crankcase reduce the effect of the action of the wind on the system, and then the number of weights in coverage.
* Complete: The system is suitable for a wide range of panels (width 950 ÷ 1050 mm x height 1559 ÷ 1690 mm).
* Versatile: the system is modular, allowing an extremely flexible panels layout.
* Electrically Safe: special center and end terminals allow the grounding of the system.
* Tested: tested in the wind tunnel up to 240 km / h.

Versions:
* Aluminum brackets AW 6060 T66 / T5 according to EN 755-2: 2013
* A2-70 stainless steel bolts to EN ISO 3506-1 / 2: 2009

Suitable for:
* Flat roof without drilling

Possible configurations:
* Single module horizontally

Function:
* Define the installation layout taking into account the distances to cover edges and obstacles.
* Define the number of weights (to be purchased separately) to use for each individual element (brackets or port ballast) as a function of the snow and wind loads of the installation area of ​​the plant, according to the national regulations.
* Place the front brackets SW-II BF and the brackets SW-II S-B (intermediate and final) on the cover, according to the project.
* Place the solar panels on the brackets and secure them using the terminals SW and SW-MC-II-II-MF.
* Fix the crankcase SW-II S CARTER on intermediate brackets SW-II BM-S and SW-II-S BE end to reduce the effect of the action of the wind.
* Place the ballast as designed.
* Protecting cover interposing the protective bearings SW-II PAD under the ballast.

Reviews Solar system for flat roofs with 15° inclination and Sud panel...

No reviews available for the product Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15°

Similar to FISCHER 547027

Other customers also bought