FISCHER 552336 - Quick-drying acrylic sealant SA RAPID COLOR

Quick-drying acrylic sealant SA RAPID COLOR
Acrylic based sealant in aqueous dispersion elastoplastic.
* Certificate for internal applications.
* Smooth finish.

Support materials:
* Plasterboard
* Concrete
* Masonry
* Wood
* Plaster
* Plastics (not on PE, PP, PTFE)
* Porous media generally

Not suitable for:
* Natural stone
* Bituminous substrates, tarred sheaths

Advantages:
* It dries quickly, allowing to continue the work in a short time.
* CE marked for the sealing of the inner side facades.Excellent paintability after 20 'with most paints on the market, we recommend preliminary tests.
* Odorless, contains no solvents and is non-corrosive.
* Tested EC1 PLUS very low emissions.
* Will not damage painted surfaces.Good resistance to chemicals and UV rays.
* In extreme radiation conditions RAPID COLOR SA BI could change color.
* Resistant to water washout (not stagnant) and moisture after hardening.

Certificate for non-structural sealing:
* Facades in buildings inner side F- INT

Also suitable for sealing:
* Once subject to low stresses.Works which require quick drying and painting: preparation, compartments, stand.
* Sealing inner side of fixtures, walls and joints between bins.
* Repair of cracks and small fissures.

Do not use on joints subject to water stagnation or frequent footfall.

Function:
* The surfaces must be solid, clean, dry, free from dust, grease, ice.
* Cut the tip of the cartridge on top of the thread.
* Turn the nozzle, cut diagonally.
* On particularly porous supports such as plasterboard is recommended a first brushstroke SA RAPID COLOR diluted with water to avoid too rapid drying of the aqueous component of the product.
* Apply with caulking gun Fischer KPM 2 PLUS or KPM 310.
* Level with a wet spatula to silicone.
* Protect from frost until fully cured.
* Do not apply during rain, after application Protect from rain for at least 6 hours.

 

• Colour: White
• contents: 310
• Storage: 18