FISCHER 71044 - Polyurethane foam for roof tiles for gun PUP T

Polyurethane foam tiles and tiles PU T / PUP T
Polyurethane foam for fixing tiles and tiles

It adheres to all standard support materials such as:
* Concrete
* Elements anodized
* Masonry
* Metals
* Wood
* Gypsum plasterboard
* Plastics (not on PE, PP, PTFE, silicone)
* Stone

Advantages:
* The foam reduces the time and installation costs compared with traditional tiles connection methods such as screws, mortar, wires or clips.
* The special formulation gives the foam high adhesion to all substrates, minimizing the holes in coverage and permanent weights.
* The controlled expansion does not cause lifting bricks or tiles during hardening.
* Good thermal insulation properties.
* Good resistance to chemicals.
* The hardened foam can be processed (sawn, cut, filed), then painted and / or plastered.
* CFC and H-CFC.

Applications:
* Fixing of tiles and tiles
* Filling a cavity between slabs and insulating panels
* Isolation and filling of finishing elements, connections between walls, crossings of pipes and cavities

Function:
* The surfaces must be clean and free of oil, grease or dust.
* Shake the bottle for at least 20 times before use and screw the gun Fischer PUPN 1 or PUPM 3 to the valve.
* Moisten surfaces with a water sprayer prior to application.
* Apply 2 strips on the surface of the roof in correspondence with the row of tiles to be fixed.
* Place the tiles within 5 minutes of light pressure.
* Connect the neighboring tiles with 2 binding points and position the upper tile within 5 minutes. For brief interruptions, it is possible to store the partially used bottle inserted leaving the gun.
* If the gun is removed internally it should also be cleaned with cleaner Fischer PUR 500
* Protect from UV exposure.

 

• application: Gun
• Colour: grey
• Cylinder contents: 750
• Storage: 18 vertical