Share
reply Back
FISCHER Pole intermediate in aluminum PI BP - 1
List Price
$ 196.51
Save 30%
Mister Worker™ Price
$ 138.54 VAT Excluded?
List Price
$ 196.51 Save 30%
Mister Worker™ Price
$ 138.54 VAT Excluded?

FISCHER 539500 - Pole intermediate in aluminum PI BP

EAN: 8001132061190
FISCHER Pole intermediate in aluminum PI BP - 1
List Price
$ 196.51
Save 30%
Mister Worker™ Price
$ 138.54 VAT Excluded?
List Price
$ 196.51 Save 30%
Mister Worker™ Price
$ 138.54 VAT Excluded?
EAN: 8001132061190
Pole Intermediate PI ALU Intermediate resilient pole flatbed for horizontal flexible lines in residential roofing Support materials: * Floors and Concrete slabs * Steel beams * Elements in...
  • FISCHER Pole intermediate in aluminum PI BP - 1
  • FISCHER Pole intermediate in aluminum PI BP - 3
  • FISCHER Pole intermediate in aluminum PI BP - 4
Code
Weight
Height H [mm]
Pieces per pack
number of packs
Total pieces
Availability
Price (Vat Excl.) ?
Quantity
539500
3
400
1
1
1
Checking availability...
$ 196.51
$ 138.54
539501
3,4
500
1
1
1
Checking availability...
$ 219.59
$ 154.80
Code 539500
Material Aluminum
Weight 3
Height H [mm] 400
Tested type C
Pieces per pack 1
number of packs 1
Total pieces 1
Availability Checking availability...
Price
$ 138.54
Quantity
Code 539501
Material Aluminum
Weight 3,4
Height H [mm] 500
Tested type C
Pieces per pack 1
number of packs 1
Total pieces 1
Availability Checking availability...
Price
$ 154.80
Quantity
Pole Intermediate PI ALU
Intermediate resilient pole flatbed for horizontal flexible lines in residential roofing

Support materials:
* Floors and Concrete slabs
* Steel beams
* Elements in wood

Advantages:
* The pole Alu PI passed the accelerated corrosion salt spray test according to EN ISO 9227: 2012.
* The pole Alu PI is tested for the simultaneous use of 3 operators (type C) according to UNI 11578: 2015 (permanent devices) and according to UNI EN 795: 2012 + CEN / TS 16415: 2013 (removable devices).
* The flexible horizontal anchoring system is tested on different types of support.
* The maximum force acting in the top of the pole is always 8 KN.
* The pole Alu PI is non-deformable and does not need to be replaced after being put into operation (subject to acceptance of the work the designer).

Suitable for:
* Flexible horizontal anchoring system (type C)

Where:
* Rope
* Sink
* Terminal clamp
* Turnbuckle
* Tension (optional)

Function:
* Make sure that the cover possesses adequate load-bearing capacity.
* Otherwise alternative mounting solutions (see Chapter 9) are available.
* Secure the base plate of the pole to the support as indicated in the draft safety of the coverage.
* Protect from the elements and fastening the base plate of the pole using the flashing accessory.
* If the hedge is double-pitched use the Multibase MB shaped support to bring in the support plane of the base plate of the pole.
* Fill out the identification plate with the system installation date and batch number and affix the label to access the anchorage system.
* The length of the span between two poles must be between 5 and 15 m, instead of the maximum total length of the line should be less than or equal to 60 m are not allowed deviations from the rectilinear configuration.
* Use the horizontal flexible anchor system (type C) with personal protective equipment (PPE) with a maximum force transmitted to the operator in case of arrest equal to 6 kN (600 kg).

 

  • Material: Aluminum
  • Tested type: C
Pole Intermediate PI ALU
Intermediate resilient pole flatbed for horizontal flexible lines in residential roofing

Support materials:
* Floors and Concrete slabs
* Steel beams
* Elements in wood

Advantages:
* The pole Alu PI passed the accelerated corrosion salt spray test according to EN ISO 9227: 2012.
* The pole Alu PI is tested for the simultaneous use of 3 operators (type C) according to UNI 11578: 2015 (permanent devices) and according to UNI EN 795: 2012 + CEN / TS 16415: 2013 (removable devices).
* The flexible horizontal anchoring system is tested on different types of support.
* The maximum force acting in the top of the pole is always 8 KN.
* The pole Alu PI is non-deformable and does not need to be replaced after being put into operation (subject to acceptance of the work the designer).

Suitable for:
* Flexible horizontal anchoring system (type C)

Where:
* Rope
* Sink
* Terminal clamp
* Turnbuckle
* Tension (optional)

Function:
* Make sure that the cover possesses adequate load-bearing capacity.
* Otherwise alternative mounting solutions (see Chapter 9) are available.
* Secure the base plate of the pole to the support as indicated in the draft safety of the coverage.
* Protect from the elements and fastening the base plate of the pole using the flashing accessory.
* If the hedge is double-pitched use the Multibase MB shaped support to bring in the support plane of the base plate of the pole.
* Fill out the identification plate with the system installation date and batch number and affix the label to access the anchorage system.
* The length of the span between two poles must be between 5 and 15 m, instead of the maximum total length of the line should be less than or equal to 60 m are not allowed deviations from the rectilinear configuration.
* Use the horizontal flexible anchor system (type C) with personal protective equipment (PPE) with a maximum force transmitted to the operator in case of arrest equal to 6 kN (600 kg).

Reviews Pole intermediate in aluminum PI BP

No reviews available for the product Pole intermediate in aluminum PI BP

Similar to FISCHER 539500

Other customers also bought