KNIPEX 13 46 165 - Stripping Pliers chrome plated, insulated with multi-component grips, VDE tested, 165mm
Find out more here.
For more information click here.
Stripping Pliers chrome plated, insulated with multi-component grips, VDE tested, 165mm.
For time-saving stripping of all round sheathed and damp-proof installation cables (e.g. NYM cable).
Simplified access especially into deep mounted junction boxes thanks to slim head design and optimally angled cable sheath cutter.
Strip cables easily and without damage thanks to circular cutting edge with depth limiter.
Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm².
With side cutters for cutting and trimming conductors, wires, small screws and nails.
All cutters additionally induction-hardened to approx. 61 HRC for high wear resistance.
30 % lighter than comparable pliers.
Vanadium electric steel, forged, multi stage oil-hardened.
The all-round talent specialising in dismantling and wire stripping.
Ideal for dismantling in deep flush mounted sockets.
The 13 46 165 dismantling pliers from Knipex permit efficient and ergonomic working also in low-lying flush mounted sockets.
The slim head design and the ideally angled cable sheath cutter give the user freedom of movement.
A twisting cutting action that is scarcely offset to the tool axis can be carried out without any particularly contorted movements, and then the cable sheath stripped after a short bending movement.
The depth restriction of the circular cutting edge (safety shoulder) only allows the blade to permeate the sheath at a depth necessary for breaking and stripping the cable sheath.
After dismantling, when the core insulation is protected behind the cable sheath cutter by the safety shoulder, the ends of the cable can be stripped with the pliers.
Two accurately machined wire stripping holes for conductors with 1.5 and 2.5 mm² enable work to continue without a change of tools.
Even the cutting of cable and single conductors before or after dismantling and stripping is possible using the Knipex 13 46 165 dismantling pliers: thanks to the integrated diagonal cutters.
The multi-component grips are insulated and VDE tested.
Wire stripping possible for conductors with 1.5 and 2.5 mm² - VDE tested
Sharp diagonal cutters, that can powerfully cut single conductors, wire, small screws and nails, are integrated in the dismantling pliers.
The cutting edges are additionally induction hardened to approx. 61 HRC for high wear resistance.
This wide range of functions saves an added tool for many common work steps.
Despite the fact that several tool functions are combined in these dismantling pliers, they weigh 30 % less than comparable, conventional dismantling pliers.
The chrome-plating provides good corrosion resistance, for example if the dismantling pliers are kept permanently in the electrician's service vehicle where temperature changes can result in condensation on the tool.
Knipex dismantling pliers: a lot of functions with low weight.
The 13 46 165 dismantling pliers shorten work considerably during the last centimetres and millimetres of electrical installation work, because they can be used for convenient, time-saving dismantling and wire stripping.
Slim head design and ideally angled cable sheath cutting edges for good access to cable in a flush mounted socket
The great benefits of the tools and their safe, comfortable use are the results of decades of experience making pliers, continuous product development and the commitment by Knipex towards high quality standards.
- Bevel: cutting edges with bevel
- Cable Stripping Values (Diameter): 8 - 13 mm
- Cutting Capacities Hard Wire: 2.2 mm
- Cutting Capacities Medium-Hard Wire: 3.2 mm
- Handles: insulated with multi-component grips, VDE-tested
- Head : chrome plated
- height: 27 mm
- length: 165 mm
- RoHs: no
- Standard DIN: DIN EN 60900
- Standard IEC: IEC 60900
- Stripping Capacities mm2: 0.75 - 1.5 / 2.5 mm²
- Surface: chrome plated
- Weight: 210 g
- width: 57 mm