KNIPEX 35 32 115 ESD - Electronics Pliers ESD head mirror polished, handles with multi-component grips
Find out more here.
For more information click here.
Precision pliers for fine assembly work, e g. in electronics and fine mechanics.
For gripping, holding and bending.
Electrically discharging handles - dissipative.
Sturdy, zero backlash box joint.
Smooth ground gripping surfaces.
Edges carefully deburred.
Low-friction double spring for gentle and even opening.
The mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.
With two-colour dual component grips, black/grey.
Special tool steel, forged, oil-hardened.
Small, slender and with ESD protection: the gripping pliers for sensitive electronics.
Compact and good: 115 mm long for plenty of freedom of movement even where space is restricted
There is little room when working on electronic equipment, printed circuit boards and precision constructions such as measuring equipment and delicate apparatus: ideal conditions for the Knipex 35 32 115 ESD electronics pliers.
These enable you to work well even in poorly accessible areas.
With their slim, flat head and a length of just 115 mm, these electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components.
The gripping surfaces are smooth ground to protect sensitive surfaces, and are tapered at the front.
Smooth operating and accurate, with box joint design and double spring
The smaller and more sensitive the component, the more precision pliers must deliver.
The accurate, well-measured transmission of manual force to the component is one of the prerequisites when working in electronics and precision engineering.
The mechanics of the Knipex 35 32 115 ESD are very finely adjusted.
The joint is solid and smooth operating due to the box joint design.
The inner handle is guided on both sides by the outer handle.
This ensures precise running without any tilting effect.
The low friction double spring supports the gentle opening of the pliers.
Sudden discharge resulting from electrostatic charging differences is feared in electronics because it can damage components.
With the Knipex 35 32 115 ESD electronics pliers, the electrostatic energy is discharged in a constant, controlled manner continuously via the conductive handles.
This avoids high potential differences between component and tool.
There is no sudden discharge.
The rust protection is also safe for sensitive electronic components.
There is no chrome-plating, therefore no pieces of chrome can peel off and fall onto printed circuit boards.
The mirror polish in conjunction with a fine oil film applied in the factory provides corrosion protection for the pliers during workshop use.
The oil film must be replaced occasionally.
ESD protection from uncontrolled electrostatic discharge; safety rust protection.
With the Knipex 35 31 115 ESD, the wire ends on components are delicately bent.
- Handles: with multi-component grips
- Head : mirror polished
- Head Width: 11 mm
- height: 17 mm
- Jaw Length: 22.5 mm
- Jaw Thickness: 6.5 mm
- Jaw Type: round jaws
- Joint Type: box joint
- length: 115 mm
- RoHs: no
- Standard DIN: DIN EN 61 340-5, DIN ISO 9655
- Style: round, pointed jaws
- Tip Thickness: 1 mm
- Tip Width: 2 mm
- Weight: 79 g
- width: 71 mm