KNIPEX 95 16 200 - Cable Shears chrome plated, handles insulated with multi-component grips, VDE-tested

Please note that Knipex items can't be shipped to the US.

Insulated according to IEC 60900, usable up to 1000 V AC/1500 V DC.
Cable Shears chrome plated, handles insulated with multi-component grips, VDE-tested.
For cutting copper and aluminium single conductors as well as multiple stranded cables.
Not suitable for steel wire and hard drawn copper conductors.
Precision-ground, hardened blades.
Clean and smooth cut without crushing and deformation.
Easy cutting with one-hand operation.
Initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut.
Low handforce required due to favourable lever ratio and special blade geometry.
With guard.
Adjustable bolted joint, self-retaining screw.
Forged.
High-grade Special tool steel, forged, oil-hardened.

Knipex quality - the VDE tested cable shears with twin cutting edge.
Cut cable with large cross-sections professionally and conveniently.
Cut stranded Cu and Al cable up to 70 mm² in two operations.
The twin cutting edge of the Knipex 95 16 200 is literally special in two respects: with larger cable cross-sections there is an initial cut into the insulating sheath in the front cutter profile; the metal conductors are subsequently cut in the back cutter profile.
This division of work on the cutting edge brought about by its design makes work easier for the user.
The initial cut in the front profile also provides a hand-friendly grip position for large cross-sections.
Unlike diagonal cutters with blades that meet at an obtuse angle, and which crush cable insulation and deform cable ends, the Knipex 95 16 200 cable shears cut with the twin cutting edge using a scissors action.
This principle produces a substantially better result, because the cable is not crushed, but is cut very smoothly and cleanly.
They are therefore excellent for shortening stranded and finely stranded Cu and Al cables, also with large cross-sections.
For reasons of design, the cable shears must not be used to cut steel wire or hard drawn copper conductors.
Why cable should only be cut using cable shears.
These cable shears conserve the manual force of the fitter and protect the cable insulation by preventing crushing.
The precision ground, hardened twin cutting edge delivers lasting clean, even cuts.
Due to the favourable transmission ratio, comparatively little effort is required.
The precisely running bolted joint also contributes to comfortable work using these cable shears.
The bolted joint is self-locking and can be adjusted where necessary.
The insulating multi-component grips offer users additional protection from an electric shock when working on live parts.
The Knipex cable shears with twin cutting edge are a tool for electrical installation.
Those who use tools a lot and professionally every day expect a quality that permits simple and safe work as well as a tool that lasts for many years of hard use.
We forge our tools from quality materials, machine them with high precision on modern machinery and harden them with careful multiple stage heat treatment.
Every pair of Knipex pliers represents more than 130 years of specialist know-how.

 

• AWG: 2 / 0
• Cutting capacity copper cable, multiple-stranded: 70 mm²
• Cutting capacity copper cable, multiple-stranded (diameter): 20mm
• Handles: insulated with multi-component grips, VDE-tested
• Height: 19 mm
• Joint Type: Bolted joint
• length: 220 mm
• RoHs: No
• Standard DIN: DIN EN 60900
• Standard IEC: IEC 60900
• Surface: chrome plated
• Weight: 340 g
• width: 68 mm