Teilen
reply Back
FISCHER Plate with lanyard PGC 200-250 A - 1
Listenpreis
€ 193,97
30% sparen
Mister Worker™ Preis
€ 136,74 inklusiv MWST?
Listenpreis
€ 193,97 30% sparen
Mister Worker™ Preis
€ 136,74 inklusiv MWST?

FISCHER 543600 - Plate with lanyard PGC 200-250 A

EAN: 8001132065617
FISCHER Plate with lanyard PGC 200-250 A - 1
Listenpreis
€ 193,97
30% sparen
Mister Worker™ Preis
€ 136,74 inklusiv MWST?
Listenpreis
€ 193,97 30% sparen
Mister Worker™ Preis
€ 136,74 inklusiv MWST?
EAN: 8001132065617
PGC plate with lanyard type A Punctual versatile anchoring device for sheet metal roofs which are then covered with tiles Support materials: * Corrugated sheet metal * Metal panel, insulated...
  • FISCHER Plate with lanyard PGC 200-250 A - 1
  • FISCHER Plate with lanyard PGC 200-250 A - 3
  • FISCHER Plate with lanyard PGC 200-250 A - 4
Kode
Stück pro Paket
Anzahl der Packungen
insgesamt Stücke
Verfügbarkeit
Preis (Vat Incl.) ?
Menge
543600
1
1
1
Checking availability...
€ 193,97
€ 136,74
Kode 543600
Gewicht 1,4
Tested type A
Wheelbase ribs 200, 225, 250
Stück pro Paket 1
Anzahl der Packungen 1
insgesamt Stücke 1
Verfügbarkeit Checking availability...
Preis
€ 136,74
Menge
PGC plate with lanyard type A
Punctual versatile anchoring device for sheet metal roofs which are then covered with tiles

Support materials:
* Corrugated sheet metal
* Metal panel, insulated

Advantages:
* The plate has passed the accelerated corrosion salt spray test according to EN ISO 9227: 2012.
* The plate is tested for the simultaneous use of 2 operators (type A) according to UNI 11578: 2015 (permanent devices) and according to UNI EN 795: 2012 + CEN / TS 16415: 2013 (removable devices).
* The plate is formed from a single sheet and is therefore devoid of welding, thus ensuring maximum safety against falls.
* The plate allows the fixing of sheet metal with spacing ribs 200, 225 mm and 500 mm.
* The plate is supplied complete structural rivets with EPDM gasket.

Suitable for:
* System punctual anchor for metal sheet (type A) in steel and aluminum

Function:
* Make sure that the cover possesses adequate load-bearing capacity.
* Install the plate on the sheet / panel section between two load-bearing elements (metal or wooden beams).
* Place pieces of tape butyl CG INT on the contact surfaces between the device and the ribs of the sheet metal in order to avoid galvanic corrosion.
* Fix the plate to the plate or to the panel using only the rivets contained in the package.
* Do not install the sheet metal element plate / the edge of the cover panel.
* If the edge element is sectioned longitudinally perform the installation from the third element.
* Fill out the identification plate with the installation date and the lot number and affix the label of access to coverage.

 

  • Gewicht: 1,4
  • Tested type: A
  • Wheelbase ribs: 200, 225, 250
PGC plate with lanyard type A
Punctual versatile anchoring device for sheet metal roofs which are then covered with tiles

Support materials:
* Corrugated sheet metal
* Metal panel, insulated

Advantages:
* The plate has passed the accelerated corrosion salt spray test according to EN ISO 9227: 2012.
* The plate is tested for the simultaneous use of 2 operators (type A) according to UNI 11578: 2015 (permanent devices) and according to UNI EN 795: 2012 + CEN / TS 16415: 2013 (removable devices).
* The plate is formed from a single sheet and is therefore devoid of welding, thus ensuring maximum safety against falls.
* The plate allows the fixing of sheet metal with spacing ribs 200, 225 mm and 500 mm.
* The plate is supplied complete structural rivets with EPDM gasket.

Suitable for:
* System punctual anchor for metal sheet (type A) in steel and aluminum

Function:
* Make sure that the cover possesses adequate load-bearing capacity.
* Install the plate on the sheet / panel section between two load-bearing elements (metal or wooden beams).
* Place pieces of tape butyl CG INT on the contact surfaces between the device and the ribs of the sheet metal in order to avoid galvanic corrosion.
* Fix the plate to the plate or to the panel using only the rivets contained in the package.
* Do not install the sheet metal element plate / the edge of the cover panel.
* If the edge element is sectioned longitudinally perform the installation from the third element.
* Fill out the identification plate with the installation date and the lot number and affix the label of access to coverage.

Rezensionen Plate with lanyard PGC 200-250 A

Zur Zeit gibt es keine Rezensionen für das Produkt Plate with lanyard PGC 200-250 A

Ähnlich wie FISCHER 543600

Andere Kunden haben auch gekauft