Teilen
reply Back
FISCHER Double stiffening beams kit PD steel and inox - 1
Listenpreis
€ 100,54
30% sparen
Mister Worker™ Preis
€ 70,88 inklusiv MWST?
Listenpreis
€ 100,54 30% sparen
Mister Worker™ Preis
€ 70,88 inklusiv MWST?

FISCHER 536779 - Double stiffening beams kit PD steel and inox

EAN: 8001132056592
FISCHER Double stiffening beams kit PD steel and inox - 1
Listenpreis
€ 100,54
30% sparen
Mister Worker™ Preis
€ 70,88 inklusiv MWST?
Listenpreis
€ 100,54 30% sparen
Mister Worker™ Preis
€ 70,88 inklusiv MWST?
EAN: 8001132056592
Kit for double cerclage pole The fixing solution for end poles, intermediates, and deformable swivel on bearing elements with reduced dimensions Materials support: * Wooden beams * Steel beams...
  • FISCHER Double stiffening beams kit PD steel and inox - 1
  • FISCHER Double stiffening beams kit PD steel and inox - 3
  • FISCHER Double stiffening beams kit PD steel and inox - 4
Kode
Stück pro Paket
Anzahl der Packungen
insgesamt Stücke
Verfügbarkeit
Preis (Vat Incl.) ?
Menge
536779
1
1
1
Checking availability...
€ 100,54
€ 70,88
Kode 536779
Inhalt 2 profiles 30 x 50 x 3 mm - L 220 mm 2 plates 50 x 220 x 10 mm - 4 screws M 12 x 25 4 washers M 12 - nuts M 12
Gewicht 1,7
Stück pro Paket 1
Anzahl der Packungen 1
insgesamt Stücke 1
Verfügbarkeit Checking availability...
Preis
€ 70,88
Menge
Kit for double cerclage pole
The fixing solution for end poles, intermediates, and deformable swivel on bearing elements with reduced dimensions

Materials support:
* Wooden beams
* Steel beams

Advantages:
* The kit allows the installation of PG swivel poles and deformable PD (only on request with kit) on load-bearing elements in the reduced section of wood or steel elements which can not be perforated.
* The kit is supplied complete with screws M 12 required for connection to the base of the poles.
* The holes on the tubular profiles and on the plates are compatible with the holes in the base of the swivel post PG.
* Only on request it is possible to order a kit having a length of 220 mm for the installation of the deformable pole PD.

Suitable for:
* Flexible horizontal anchoring system (type C)

Where:
* Rope
* Sink
* Terminal clamp
* Turnbuckle
* Tensioner (optional)
* Pole end PE
* Intermediate PI Pole

Also suitable for:
* A point anchor system (Type A)

Where:
* Pole swivel PG
* Pole deformable PD

Function:
* Insert the base of the pole into the slots of the tubular profiles.
* Connect the base of the pole to the tubular profiles using the M 12 screws included in the package.
* Place the tubular profiles + system pole on the extrados of the carrier beam.
* Position the lower plates on the intrados of the main beam and connect to tubular profiles through the upper bars 2 + 2 M 12 - 8 washers and nuts.
* The cerclage kit must be used with wooden beams or steel and having a maximum width of 170 mm (cod. 535 264) or 110 mm (Cod. 536779).

 

  • Gewicht: 1,7
  • Inhalt: 2 profiles 30 x 50 x 3 mm - L 220 mm 2 plates 50 x 220 x 10 mm - 4 screws M 12 x 25 4 washers M 12 - nuts M 12
Kit for double cerclage pole
The fixing solution for end poles, intermediates, and deformable swivel on bearing elements with reduced dimensions

Materials support:
* Wooden beams
* Steel beams

Advantages:
* The kit allows the installation of PG swivel poles and deformable PD (only on request with kit) on load-bearing elements in the reduced section of wood or steel elements which can not be perforated.
* The kit is supplied complete with screws M 12 required for connection to the base of the poles.
* The holes on the tubular profiles and on the plates are compatible with the holes in the base of the swivel post PG.
* Only on request it is possible to order a kit having a length of 220 mm for the installation of the deformable pole PD.

Suitable for:
* Flexible horizontal anchoring system (type C)

Where:
* Rope
* Sink
* Terminal clamp
* Turnbuckle
* Tensioner (optional)
* Pole end PE
* Intermediate PI Pole

Also suitable for:
* A point anchor system (Type A)

Where:
* Pole swivel PG
* Pole deformable PD

Function:
* Insert the base of the pole into the slots of the tubular profiles.
* Connect the base of the pole to the tubular profiles using the M 12 screws included in the package.
* Place the tubular profiles + system pole on the extrados of the carrier beam.
* Position the lower plates on the intrados of the main beam and connect to tubular profiles through the upper bars 2 + 2 M 12 - 8 washers and nuts.
* The cerclage kit must be used with wooden beams or steel and having a maximum width of 170 mm (cod. 535 264) or 110 mm (Cod. 536779).

Rezensionen Double stiffening beams kit PD steel and inox

Zur Zeit gibt es keine Rezensionen für das Produkt Double stiffening beams kit PD steel and inox

Ähnlich wie FISCHER 536779

Andere Kunden haben auch gekauft